Book a free consultation

NewTYF — Text your factory

Real-time data for your factory. Real numbers for your budget.

Real-time data visibility on the factory floor.

Quantify installs permanent wireless sensors across your plant and streams everything into one real-time dashboard. And with TYF, our new AI agent, your team can text the factory a question — and get an answer in plain English.

Full-integrator: we design, order, build and install — then review the numbers with you monthly.

Book a free consultationSee the platform

Consumption · last 24 hDemo dataAlert
Grand River PowerFictional utility · illustrationELECTRICITY INVOICEGRP-2026-06-118440ACCOUNT4102 8837 61SERVICE PERIOD01 Jun – 30 Jun 2026Ridgeway Plastics Inc.118 Wellington Rd · Guelph, ONMETER E-44711021,182,940 → 1,241,54858,608kWh THIS PERIOD194kW PEAK DEMAND0.94POWER FACTORElectricity58,608 kWh @ $0.0865$5,069.59DeliveryDistribution + transmission · 194 kW billed$2,914.37Regulatory chargesWholesale market + rural rate protection$412.86Subtotal$8,396.82HST 13 %$1,091.59AMOUNT DUE$9,488.41CONSUMPTION HISTORY · kWh PER MONTHTIME AXISMONTHDAYMINUTEREADINGS · ONE DAY1,440BASELINELunch dipDemand 312 kW118 kW over your usual peak≈ $4,120 if this interval sets the month
LAST 24 H · 30-MIN BUCKETS · DASHED = BASELINE

We measure your factory 1,440 times a day.

That’s every minute, on every meter and sub-meter — water, electricity, natural gas, compressed air, temperature, pressure, vibration and level. Not a monthly bill. Not an annual audit. A reading a minute, all year.

1,440readings · per sensor · per day

Minute resolution
1,440 READINGS · PER SENSOR · PER DAY

Your whole facility, one screen.

Minute-by-minute data from every meter and sub-meter, streamed to one login — with alerts the moment something drifts off baseline.

  • Minute-by-minute readings, not month-end surprises
  • Every meter and sub-meter, water through compressed air
  • Alerts before waste becomes a line item.
Every meter, one view
NIGHT BASELINE
ALL METERS · LAST 24 H · DASHED = BASELINE

Two ways this pays for itself.

01

Production & process visibility

Silo and material levels. Vibration. Product temperature. Compressor and cooling-tower health. Predictive maintenance. This is the half that’s growing fastest — because it’s the half nobody else is metering.

02

Utility & overhead reduction

Water, electricity, natural gas and compressed air, metered permanently and priced. This is the half that pays back first.

The word “Environmental” is in our name because we started with utilities. It is not the limit of what we meter.

Every litre and kilowatt you stop wasting is also an emissions number you can defend — measured, not estimated.

Nine places your plant is leaking money.

We meter all nine, then rank fixes by payback. Conservative arithmetic, verified against your own utility bills.

  1. 01

    Water

    A 10 LPM leak costs >$15,000 a year.

    Submeter every major consumer. We find the leak in week one; the monthly review makes sure it gets fixed.

  2. 02

    Electricity

    Demand charges are often 30–40% of the bill.

    See the peaks before the utility bills them. Shift, shave or schedule — the dashboard shows which pays.

  3. 03

    Natural Gas

    Unnoticed waste quietly inflates heating bills 10–20%.

    Baseload creep is invisible on a monthly bill. It is obvious on a 60-second trace.

  4. 04

    Compressed Air

    Leaks silently eat 20–30% of compressor output.

    The most expensive utility per unit of work — and the easiest 20% you will ever recover.

  5. 05

    Silo & Material Level

    Someone is still climbing the silo to check.

    Non-contact radar level, continuous, with low-level alerts. No climbing, no mid-run surprises, no emergency reorders.

  6. 06

    Vibration

    A bearing changes its signature weeks before it seizes.

    The shift is invisible to the human senses and unmistakable in the trend.

  7. 07

    Predictive Maintenance

    Unplanned downtime runs $10,000+/hour at most plants.

    The same repair, done on a Saturday instead of in a crisis. That difference is worth more than the part.

  8. 08

    Temperature & Humidity

    The 6 a.m. round takes 31 minutes — or 0 from your desk.

    Health, safety and humidex monitoring that’s watched continuously, not checked quarterly.

  9. 09

    Process Monitoring

    A hunch is not something you can act on. Data is.

    Cycle counts, runtime, firing rate, product temperature — the process numbers your utility bill will never show you.

Sourcing (§D.7): facts 01–04 and 07 are Quantify’s own published cost framings; 05, 06, 08 and 09 are drawn from the case narratives. All nine carry [TOM-REVIEW] before launch — §K.2 #15.

TYF — Text Your Factory

Ask your factory. It answers.

Ask your factory a question in plain English and get a plain-English answer — plus the chart behind it. TYF is our AI agent, and it reads the same live data your dashboard does.

  • “What was the water use in my facility last week, day by day?”
  • “Is my compressor running well?”
  • “Do a water balance.”

See how TYF works

TYF — Text Your FactoryPlant 4 · replies instantlyPILOT

What was the water use in my facility last week, day by day?

Water · last week
MON: 41 m³TUE: 44 m³WED: 39 m³THU: 43 m³FRI: 40 m³SAT: 22 m³SUN: 19 m³41443943402219
DAILY TOTAL · m³

Weekdays run about 40 m³. Saturday and Sunday still came in at22 and 19 m³ with the plant down — that’s baseline flow, not production.

TYF is in pilot with select clients. The conversation above is illustrative.

Run the numbers on your plant.

Three inputs, one instant figure, no form. The personalized version lives on the ROI page.

square feet
dollars per year, that utility only

Nothing is submitted and nothing is stored — the figure recalculates as you type.

Typically addressable

$144,000/yr

30% of $480,000 in electricity — about $1.20 per square foot across 120,000 sq ft.

Demand charges are often 30–40% of an industrial electricity bill.

Open the full Savings Estimator →

Illustrative preview based on published benchmarks. Your number comes from your own meters.

Quantify's own published framing: 'Demand charges are often 30–40% of the bill.'

H3 resolution [TOM-REVIEW] §K.2 #8 — the teaser returns an ungated benchmark illustration; the full Savings Estimator gates the personalized itemized result behind an email. Benchmark constants are [TOM-REVIEW] §K.2 #16.

Trusted on plant floors across Ontario.

Roster reconciled in §H.3 against the Ubidots account. Open: Rubicon Food Products and St Marys Cement — include or not? [TOM-REVIEW] §K.2 #13. Transparent-background logo assets are outstanding (§K.3 #30); until they land, and per the standing rule that a real third-party brand is never a placeholder, each slot renders the client name as a neutral wordmark rather than a logo.

Verified results

Three numbers we can show you the source for.

Every figure below comes from a named client project and a citable document. Nothing here is a round number we liked the look of.

$38,400/yrCarlsberg Canada

Pasteurizer water down from 28.0 to 5.5 m³/day, with no process changes and no capital cost.

Source: NB Power RFP 0770-25-S510 FINAL, Reference 3540,000L/dayCarlsberg Canada

A failing diaphragm pump caught before it became a shutdown — over $1,333/day in costs prevented.

Source: NB Power RFP 0770-25-S510 FINAL, Reference 3>450,000LPDI Bulk

Overnight flow found and stopped — over 450,000 litres of water saved in four months at one location.

Source: NB Power RFP 0770-25-S510 FINAL, Reference 1

Row 2 of this band — facilities monitored · sensors reporting · readings ingested per day — is a build-time static snapshot, never a live query, and each value is [TOM-VALUE] §K.1 #2. Until src/data/platform-aggregates.json exists and Tom approves each number, the row does not render.

What the people on the floor say.

…immediate annual savings of over $150,000…
Jeff InkesGeneral Manager, PDI BulkRead the PDI case study [TOM-REVIEW] Full verbatim quote required before launch — only this fragment is on file. §K.2 #9.
…unprecedented visibility…
Derek CairneyMaintenance Reliability Specialist, Carlsberg CanadaRead the Carlsberg case study [TOM-REVIEW] Full verbatim quote required before launch — only this fragment is on file. §K.2 #10.
I’ve never seen a system this good.
A Ministry of Labour representative Said unprompted on a factory floor. Role only — never named, and not an institutional endorsement.

Two of these quotes exist in the archive only as the fragments shown. They are published as fragments, with attribution, rather than completed — [TOM-REVIEW] §K.2 #9 and #10.

See it for yourself.

A walk through a real install, the dashboard it feeds, and what the team does with it on a Monday morning.

What Quantify Environmental does

Featured · 60–90 s

An install, start to finish

Inside the dashboard

On the floor with the team

Video slots are placeholders. Footage is produced independently (J2) — §K.3 #29. Slots load on click; nothing here autoplays.

Ask the plant. Get the number. Keep the money.

Thirty minutes, your utility bills, our honest read on payback. If the maths doesn’t work, we’ll say so.

Your first opportunity assessment is free.

Book a free consultationSee the platform

or call 1-833-QUANTFY (1-833-782-6839)